Parts

Specialized's Sawtooth is THE adventure tire of choice, developed to handle any road surface and to be tough enough to withstand the rigors of exploration. The tread offers sharp angles and edges to hook onto any surface, while the Endurant casing reinforces the sidewall for added protection and high carrying loads. Meanwhile, our legendary GRIPTON compound offers reliable grip and control, and the center tread is reinforced for high mileage. Lastly, this iteration is set up for tubeless applications, so you're able to run lower pressures for added grip and traction, while also reducing the risk of pinch flats. - Casing: 120 TPI - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - Flat Protection: Endurant Casing and BlackBelt - 700c x 42mm; psi 50-80; approximate weight 615g

The Turbo Pro is a competitive clincher that features many of the same technologies and features found in the S-Works version. After all, competitive riders need a fast, light, and tough tire, and the Turbo Pro is all three. With the legendary grip of our GRIPTON T5 compound, you’ll be climbing, descending, and cornering with confidence and speed. The 60 TPI casing is light and reliable with BlackBelt puncture protection to avoid flats. Simple maintenance and installation with an inner tube offers a carefree road bike setup. - Compound: GRIPTON T5 - Flat Protection: BlackBelt - 700 x 24mm, psi 100-115, approximate weight 230g - 700 x 26mm, psi 95-115, approximate weight 250g - 700 x 28mm, psi 75-95, approximate weight 270g - 700 x 30mm, psi 65-90, approximate weight 290g

The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting

- The SS and SS+ feature an all-new tread pattern consisting of a smoother, diamond pattern center with more aggressive side lugs. - This tread pattern allows the rider to keep speed going into corners and maintain control throughout any transition a gravel ride could present. - The GravelKing SS incorporates a supple 126 TPI casing with a nylon puncture resistant belt and Panaracer's proprietary ZSG (Zero Slip Grip) compound. - The SS+ uses the same build as the SS but adds a bead-to-bead layer of Panaracer's ProTite puncture material for even more protection against tread and sidewall cuts for those extra demanding courses or rides with sharp flint rock.

The All Condition Armadillo Elite is the most flat-resistant tire available. Impressively though, it has performance characteristics that far exceed many competitor's race tires. We've given it a tread pattern that offers excellent all-weather traction, and newly-sourced materials for the best puncture protection possible. In terms of ride quality, our GRIPTON compound is surpassed by none. It provides low rolling resistance and the ultimate in dry and wet condition traction. Without hyperbole, it's the best flat-resistant, high-performance tire that we've ever made. - Casing: 120 TPI - Bead: Foldable - Compound: GRIPTON - Flat Protection: Armadillo Elite - 700 x 23mm, PSI 110-125, approximate weight 285g - 700 x 25mm, PSI 110-125, approximate weight 315g - 700 x 28mm, PSI 85-95, approximate weight 350g - 700 x 30mm, PSI 85-95, approximate weight 400g - 700 x 32mm, PSI 85-95, approximate weight 430g

The all-new Rhombus Pro’s aggressive tread is designed for aggressive riding on aggressive trails. With more tire clearance and more capability, today’s gravel bikes can take on tougher trails than ever before. Tires are one of the most integral components for a gravel bike’s ride quality and the Rhombus Pro delivers. It provides unmatched traction, confident cornering and improved comfort when the gravel road turns to single track. When you’re ready to get rowdy on your gravel bike, the Rhombus Pro is the tire for you. - Casing: 60 TPI - Bead: Folding - Compound: Gripton - Flat Protection: Endurant - 700c x 42 - PSI 35-65 - Approximate weight 575g

Designed for intensive training, the Rubino Pro is equally suitable for racing events. This tire builds on the standard Rubino platform, utilizing the same exclusive 3C Graphene compound structure, long service life, puncture protection, and sharp handling traits, but substitutes a folding bead material for reduced weight. The Rubino Pro has long been a favorite for both training and racing, and with the addition of Graphene technology compounds, is more versatile than ever. - 150 TPI Nylon casing for high mileage - 3 compounds in the tread (3C) for increased wear life and better rolling - All-rounder for any condition - Functionalized GRAPHENE 2.0 compound allows for increased wet grip

With a wide contact area, the PD-ME700 pedals let riders focus on the trail ahead. Designed to work seamlessly with SHIMANO AM series shoes, the SPD trail pedals deliver enhanced stability over rough terrain. FEATURES - Wide, dual-sided platform improves pedal-to-shoe stability and power transfer - Integrated cage increases control when not clipped in and protects binding mechanism from impacts - Robust retention claws provide smooth engagement and release - Rider adjustable entry and release tension for individual customization - Chrome-moly spindle and low-maintenance sealed bearing cartridge axle

- Easy step in, easy step out - Lighter spring tension optimized for beginner riders - Larger entry target for easier engagement - Cascaded features from top-tier systems - Extra-wide platform transfers pedaling power efficiently - Durable stainless steel body plate reduces flex and pedal body wear - Sealed mechanism - Single Sided Binding - Cartridge axle - Cleat retention adjuster - Average weight: 320g - Road clearance: 30 - Cleat included: SM-SH11 - Optional cleat: SM-SH10, SM-SH12 - Pedal Type: Road

The Fast Trak Control 2Bliss Ready T7 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The Control casing is our light and durable do it all XC construction. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 29 x 2.35", PSI 25-50, approximate weight 715g

The Fast Trak GRID 2Bliss Ready T7 has become synonymous with fast and lightweight tires that are able to handle the most technical courses and the most grueling conditions. This model redefines what was thought possible with a cross-country tread design. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. Adding to this, the Fast Trak profile and knob spacing has been optimized for a wide variety of internal rim widths. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 29 x 2.2", PSI 25-50, approximate weight 730g - 29 x 2.35", PSI 25-50, approximate weight 800g

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 27.5 x 2.35", PSI 25-50, approximate weight 800g - 27.5 x 2.6", PSI 25-50, approximate weight 850g

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - 27.5 x 2.35", PSI 25-50, approximate weight 800g. - 27.5 x 2.6", PSI 25-50, approximate weight 850g. - 27.5 x 3.0", PSI 25-50, approximate weight 1050g. - 29 x 2.2", PSI 25-50, approximate weight 820g. - 29 x 2.35", PSI 25-50, approximate weight 845g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Compound: GRIPTON T7.

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - T7 Balanced grip and rolling compound. - GRID Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Tubeless Ready. - GRID 27.5x2.4' T7, psi 25-50, approximate weight 870g. - GRID 29x2.4' T7, psi 25-50, approximate weight 925g.

The Renegade Control 2Bliss Ready T7 is perfect for fast accelerations, climbing in hard-pack terrain and podium finishes. Our fastest-rolling cross-country tread receives an elevated shoulder height to confidently carry speed through turns. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The Control casing is our light and durable do it all XC construction. To top off this build we use our T7 compound to maximize grip and damping. - Casing: 60 TPI, light and durable do it all XC construction - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7 - 29 x 2.35", PSI 25-50, approximate weight 645g

The Corsa has been the race-day choice of pros for years and is now better than ever with 4C Graphene compound technology! The latest Corsa is an evolution of the brand and brings multiple industry-first technologies to market. Starting with our supple yet durable 320 TPI Corespun-K reinforced casing and adding a proprietary mix of 4 different Graphene compounds, the new Corsa achieves the holy grail of performance: speed, suppleness, durability, and reliability. Whether winning a Grand Tour or a local crit, the Corsa family delivers world-class performance. - 4 separate Graphene compounds deliver speed, suppleness, durability, and reliability - Reinforced Corespun-K casing for increased sidewall protection - Folding bead

The Corsa Control tackles greasy cobbles and rough roads with all the confidence of the Vitttoria's classic Corsa. This chevron tread pattern adds dynamic performance to the Corsa Control tread, allowing for increased grip on slippery surfaces, as well as added durability. - 4 separate Graphene compounds deliver speed, suppleness, durability, and reliability - Corsa level confidence for rough roads - Reinforced Corespun-K casing for increased sidewall protection

The Corsa Control tackles greasy cobbles and rough roads with all the confidence of the classic Corsa. Sharing the same 320 TPI Corespun-K reinforced casing and technical 4C Graphene compound technology, the Corsa Control adds a textured shoulder tread to the mix. This chevron tread pattern adds dynamic performance to the Corsa Control tread, allowing for increased grip on slippery surfaces as well as added durability. - Corsa level confidence for rough roads - 4 separate Graphene compounds deliver speed, suppleness, durability, and reliability - Reinforced Corespun-K casing for increased sidewall protection

The Butcher GRID TRAIL 2Bliss Ready T7 features a World-Cup proven aggressive tread design to bite and grip in any condition. Ramped and siped, the center tread blocks provide maximum traction and accurate steering. The sawtooth faced shoulder knobs offer a continuous biting edge for railing through corners. Our GRID TRAIL casing is a step up from GRID with more reinforcement, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. Building on this solid base, the T7 GRIPTON compound enhances rolling speed while still providing tons of grip. - Casing: 60 TPI, tough trail construction with additional bead to bead protection for exceptional puncture resistance, sidewall stiffness and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T7

The latest generation of the World-Cup-proven intermediate tire, the Butcher GRID TRAIL 2Bliss Ready, receives an entirely new tread pattern. Wider shoulder knobs better support load under hard cornering, while the biting edges of the shoulder knobs are moved further inside, and the center blocks have been staggered and spaced better for a smoother transition when leaning the bike over. Meanwhile, our proprietary GRIPTON compound improves high-frequency damping, attaching the tire to the ground better on both small bumps and rough sections. The low frequencies of the rolling tire deflections pass through unfiltered, leaving no energy absorbed and keeping speed high. Once you ride the Butcher, you'll never want another tire for your gravity excursions. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pressures—all while increasing pinch flat protection by 15% and puncture protection by 30%. It's the perfect choice for your gravity excursions—one ride and you'll be hooked. Building on this solid base, the high-dampening T9 Gripton compound rebounds slowly to grip and stick to the ground for total traction and control. - Casing: 60tpi light yet tough with additional bead to bead protection for exceptional durability, sidewall stiffness, and stability. - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON T9 - 29 x 2.3", psi 25-50, approximate weight 975g - 29 x 2.6", psi 20-40, approximate weight 1050g

The Eliminator GRID TRAIL 2Bliss Ready tire features a new generation of tread that combines an aggressive block design with a well-balanced tread pattern. Its transition knobs help bridge the traditional channel between center and shoulder knobs, making the Eliminator perfect for enduro where versatility is key. The Eliminator still has the bite of a DH tire but also brings the manners to handle well on hardpacked trails. These characteristics also work well for trail e-bikes, too—combining the traction needed to stay in control on the trail with neutral handling on fire roads. Our new GRID TRAIL casing is stiffer, delivering better handling at lower pleasures—all while increasing pinch flat protection by 15% and puncture protection by 30%. - Casing: Additional bead-to-bead protection for exceptional durability, plus sidewall stiffness stability - Bead: Foldable - Butyl wrapped bead = 2Bliss Ready - Compound: GRIPTON - 29 x 2.30: PSI 25-50, approximate weight: 890g - 29 x 2.60: PSI 20-40, approximate weight: 930g

The Swiss Army knife of trail bike tires: meet the totally new Purgatory. This do-it-all tread features large center square lugs that bite in soft soil, while still providing support on hard-packed ground and equally at home on the front or back of the bike. Block-in-block knobs rolls fast, adapt to terrain, but are supremely confident when pushed hard. There’s plenty of meat on the Purgatory’s carcass to offer reassuring grip across a wide range of terrain. - High volume center blocks for climbing and braking traction, suitable for front or rear. - Block-in-block knobs adapt to find grip. - Staggered shoulder blocks for predictability and corner control. - Compound: T7 for balanced speed and rolling efficiency. - Tubeless Ready. - GRID Trail 27.5x2.4' T7, psi 25-50, approximate weight 915g. - GRID Trail 29x2.4' T7, psi 25-50, approximate weight 980g.

The S-Works Turbo tire sets the standard for a fast and durable performance tube type race tire. Our all new Gripton T2 center compound is the fastest, most efficient compound we have ever developed. T2 is placed in the center of our dual compound for speed and longevity on the straights with T5 compound on the shoulders for incredible grip through the corners. - Casing: 120 TPI - Bead: Foldable tube type - Dual Compound: GRIPTON T2/T5 - Flat Protection: BlackBelt - 700 x 24mm, psi 100-115, approximate weight 200g - 700 x 26mm, psi 95-115, approximate weight 220g - 700 x 28mm, psi 75-95, approximate weight 240g - 700 x 30mm, psi 65-90, approximate weight 260g

Speed and reliability for riders pursuing a new performance level Corsa N.EXT is the exciting new addition to the Corsa family. Designed to satisfy the requirements of enthusiast cyclists who clock up the miles on long and demanding weekly rides, Corsa N.EXT combines Vittoria's peerless knowledge of racing performance with the durability of a long-lasting nylon casing that uses a unique Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life. To increase puncture protection, the central section of the casing features 3 layers of nylon as well as an additional puncture protection belt. Corsa N.EXT is the first road racing tire to feature a QR Code—printed on the tire hot patch—for easy access to useful technical information about the tire. Racing inspired speed and feel, with the everyday durability of nylon construction - New combination of Silica and Graphene compound for improved rolling efficiency, grip and longer wear-life - Nylon casing provides durability, for daily racers who want to raise the bar of their performance relying on a long-lasting tyre - Proven tread design used by Vittoria teams in the World Tour

The Butcher GRID GRAVITY 2Bliss Ready T9 is the perfect choice for trail and gravity riders. Ramped and siped center tread blocks provide strong traction and accurate steering, while the shoulder knobs offer a continuous biting edge for railing through fast corners. The GRID GRAVITY casing compliments gravity riding with an all-new 2-ply construction for cornering stability and flat protection. Building on this solid base, the high-dampening T9 GRIPTON compound rebounds slowly to grip and stick to the ground for total traction and control. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40 approximate weight 1350g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T9.

Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast-rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability, and cornering traction. - 29x2.3", psi 25-50, approximate weight 1300g. - 29x2.6", psi 20-40, approximate weight 1400g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, Dual-Ply. - Compound: GRIPTON T7/T9.

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Shimano's M540s are race-ready clipless pedals that don't require a team budget. These rugged, light beauties feature dual-sided Shimano SPD bindings that are easy to enter and exit and deliver excellent power transfer and maneuverability. The bindings are adjustable for dialing in the perfect tension and these sweet pedals have an open mud-shedding design to prevent clogging. Plus, the M540s are built to last with chromoly axles and sealed-cartridge bearings. - 352 grams (pair)

PD-EH500 pedals FEATURE - One side SPD, the other side flat - Light action binding makes frequent stepping-in & out easier - Better grip on flat side for wet condition BENEFIT - Convenient road touring pedal - Optimized for urban riding - Multi-condition - Best match with CT or MT shoes

The world’s fastest riders are always hungry for more traction. So when Loïc Bruni, Finn Iles, and Chris Grice from the Gravity team reached out to us to develop a mountain bike tire to tame World Cup Downhill tracks, we cooked up something that will satisfy even the most aggressive appetites. We completely redesigned the Cannibal tread pattern, integrating our super-sticky GRIPTON T9 compound with a high-volume casing that brings superior control to any terrain. Staggered shoulder blocks maximize cornering stability, and large center braking blocks bite aggressively into the ground. Engineered to the design specifications of our riders, the Cannibal balances weight and durability with GRID Gravity casing for Enduro, Downhill, and Park riding. The Cannibal delivers the unbeatable combination of grip, confidence, and control to devour any track. - High-volume casing and staggered shoulder blocks for predictable high-speed cornering. - Re-designed center knobs and siping form strong surface connections. - Wide braking edges and massive center blocks cut in for maximum deceleration. - GRIPTON T9 compound reduces terrain-induced chatter, enhancing confidence at warp speeds. - Compliant and adaptable GRID GRAVITY 2-ply casing construction is ideal for Enduro, Park, and Downhill riding. - 2Bliss Ready technology protects against pinch flats, cuts, and punctures.

Calling the S-Works Mondo just an endurance tire is an insult. We believe it’s the fastest piece of endurance engineering on earth. Delivering everything riders demand from a class-leading endurance tire — long miles durability, all-weather traction, incredible puncture protection — and amplifying it with the performance riders want, like best-in-class efficiency and light weight, the S-Works Mondo tubeless tire is the fastest endurance tire ever. 11% more efficient and 5% lighter than any other endurance tire on the road*, it’s our go-anywhere, do-anything, optimum combination of speed and durability. Available in 28, 32, and 35 mm widths, you’ll be ready for anything the road ahead throws at you. The World Was Made For Mondo. *When measured in a lab setting S-Works Mondo showed the lowest rolling resistance numbers and lowest weight of any competitor in its class. - Casing: 120 TPI - Bead: Foldable 2Bliss Ready - Dual Compound: GRIPTON® T2/T5 - Flat Protection: GRID RACE and BlackBelt - 700 x 28mm, psi 70-95, approximate weight 310g - 700 x 32mm, psi 50-80, approximate weight 330g - 700 x 35mm, psi 50-80, approximate weight 360g

When tubeless performance on race day is mandatory but durability for rough roads all season is just as important the S-Works 2BR delivers—from cobbled classics to your daily lunch ride. Our all-new Gripton T2 compound is the fastest, most efficient compound we’ve ever created. We’ve combined this with the legendary grip of our Gripton T5 compound on the shoulders to the Turbo 2BR more grip, speed, and durability than ever before—six watts faster vs the previous 2BR and just 260 grams for a 26mm tire. - Casing: 120 TPI - Bead: Foldable 2Bliss Ready - Dual Compound: GRIPTON T2/T5 - Flat Protection: BlackBelt - 700 x 26mm, psi 70-110, approximate weight 260g - 700 x 28mm, psi 70-95, approximate weight 280g - 700 x 30mm, psi 65-90, approximate weight 300g

The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise

The new Vittoria Mazza combines years of athlete input with cutting-edge tread technology, raising the bar on the mixed terrain Enduro tire category. Starting with a defined center tread, the Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp but digs in on climbs, making Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction, while also accelerating mud clearing. Cornering on the Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. Simply put, bigger sipes flex more than smaller sipes. This unique siping pattern creates asymmetrical tread flex and translates into a predictable, confident, and communicative feel at the limit of cornering. Mazza's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. The bar has been raised. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe width for tactile grip on rocks and roots - Stepped leading-edge center-tread maintains speed and delivers climbing traction

The Corsa Control tackles greasy cobbles and rough roads with all the confidence of Vitttoria's classic Corsa. This chevron tread pattern adds dynamic performance to the Corsa Control tread, allowing for increased grip on slippery surfaces, as well as added durability. - 4 separate Graphene compounds deliver speed, suppleness, durability, and reliability - Corsa level confidence for rough roads - Reinforced Corespun-K casing for increased sidewall protection

Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color

The all-new S-Works Turbo RapidAir is our ultimate race day tire. The most efficient, lightest, best handling, and durable tubeless tire we’ve ever made. The original RapidAir is the tire that broke the World Tour’s addiction to tubulars with Tour de France stage wins, Green Jerseys, and Monument victories. Coaxing more speed and a longer life from our fastest race-day tubeless tire was no easy feat. - Casing: 120 TPI - Bead: Foldable 2Bliss Ready - Dual Compound: GRIPTON T2/T5 - Flat Protection: BlackBelt - 700 x 26mm, psi 70-110, approximate weight 230g

Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding. - 310 grams (pair)

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Shimano Deore XT Explorer Dual-Platform Pedals combine the efficiency of the SPD system and the convenience of a platform pedal, all in a lightweight package. - One side SPD, one side platform - Two-sided flexibility and performance - Ideal for trekking - Customize the entry and release tension settings - 392 grams - Concave cleat clearance on platform side - High-grip pins - Sealed cup and cone bearings

- Wide pedal-to-shoe contact - Lower platform height for pedaling stability - Integrated cage increases stability and control when not clipped in and protects binding mechanism against impacts - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-molly spindle with 8 mm hex wrench mount - Sealed mechanism - 1.0 mm cleat spacer included - Binding Dual sided - SM-SH51 Cleat included - Cleat retention adjuster - Integrated cage - Cartridge axle - Average weight: 438g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)

The Specialized Phenom Comp is a mountain bike saddle that's designed for comfort and strength over long days on the trail. It features a carbon-reinforced construction, Cr-Mo rails, and SWAT mounts for the utmost in utility. - Patented Body Geometry Design is lab tested to assure blood flow to sensitive arteries. - Carbon-reinforced shell with flexible Adaptive Edge technology adapts to your body for a custom fit and all-day comfort. - Low friction panels on the nose and tail improve pedaling efficiency and mobility while moving ‘on and off’ the saddle. - Light and super-durable, hollow Cr-Mo rails. - Lightweight and supportive PU foam for increased comfort on longer rides. - Level 2 padding: Medium density foam for bike feel with additional cushioning. - SWAT compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Size 143mm / Weight 254g - Size 155mm / Weight 260g

For as long as there've been saddles, women have been having issues with them. But, where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And, when you combine this technology with the long-nosed, flat profile of the Phenom Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level II padding: Medium density foam for bike feel with additional cushioning. - Light, durable, and hollow Cr-Mo rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

Specialized's lightweight Power Comp saddle is Body Geometry designed for both men and women to have top performance in a more aggressive position. Proven through blood-flow testing and pressure mapping, the extra wide and elongated Body Geometry channel and proper sitbone support allows for all day comfort. • Patented Body Geometry design is lab tested for both men and women to assure blood flow to sensitive arteries • Stiff, carbon-reinforced shell for longevity and all-day riding efficiency • Lightweight and supportive PU padding for comfort and support on longer rides • Lightweight and super-durable hollow Cr-Mo rails • Tough, light and water resistant cover • Level 2 padding: Medium density foam; bike feel with additional cushioning • SWAT compatible mounts co-molded into the saddle base allow for sleek and integrated storage solutions

For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. We spent countless hours performing research and prototyping in order to give you the comfort that you've been rightfully longing for. With our patented design, Mimic technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with our Power Comp saddle, with its hollow Cr-Mo rails and level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Light, durable, and hollow Cr-Mo rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Weight: 220g

For as long as there've been saddles, women have been having issues with them. But where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And when you combine this technology with the long-nosed, curved profile of the Romin Evo Comp saddle, with its hollow Cr-Mo rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Light, durable, and hollow Cr-Mo rails. - Level II padding: Medium density foam for bike feel with additional cushioning. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

The OneUp Aluminum Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading hexagonal steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 365g, the OneUp Aluminum Pedals won't slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedals sitting in the natural arch of your foot. The ultra-thin design (only 8mm at the leading edge) gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle. Clip Less, Ride More. When it s finally time to service your bearings, the unique cassette tool lock ring system makes re-greasing the bearings exceptionally fast and easy. FEATURES - 10 rear loading custom hexagonal removable pins per side for maximum grip - Ultra thin leading edge chamfered design to deflect off any obstacle - Fully sealed and serviceable design with built in bearing extractor - Wide platform design for increased stability - Contoured shape provides ultimate connected feel SPECS - Weight: 365g - Platform Size: 115x105mm - # of Pins: 10 per side - Axle Material: Chromoly steel - Height: 8.3-12mm - Pin to Axle distance: 112mm - Color: Black, Green, Grey, Blue, Orange, Red, Purple, OilSlick - Body Material: 6061-T6 Aluminum COMPATIBILITY - Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks. - These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.

ONEUP CARBON BARS. Strong, lightweight & vertically compliant. The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle. The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone. We benchmarked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains. Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right. SPECS - Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up - Weight: 20mm Rise (220g) 35mm Rise (225g) - Max Stem Clamp Width: 65mm - Max Control Torque: 5Nm - Minimum Trim width: 740mm - Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White COMPATIBILITY - Grips with only an outer clamp are not compatible with our bar.

PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65

For as long as there've been saddles, women have been having issues with them. But, where some see unsolvable problems, we see practical solutions. With our patented design, MIMIC technology helps create a saddle that perfectly adapts to your body to give you the support you need. And, when you combine this technology with the long-nosed, flat profile of the Phenom Expert saddle, with its hollow titanium rails and Level II padding for extra comfort, you get a high-performance saddle that's designed to help you perform at your best. It still features all of the Body Geometry design characteristics you know and love, so you can be assured of superior, all-day comfort in any ride position. - Innovative Mimic technology uses multilayered materials to maintain equilibrium and minimize swelling in soft tissue. - Level II padding: Medium density foam for bike feel with additional cushioning. - Lightweight, durable, and hollow titanium rails. - Patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions.

The OneUp Dropper post is available in 120mm, 150mm, 180mm and 210mm lengths and all can be shimmed down in travel by 10 or 20mm. We've been obsessed with shaving every last millimeter from the latest OneUp post to give you the the shortest stack height and shortest total length of any dropper post. No other post can get your saddle lower. Starting from $199 USD with free shipping worldwide, cable actuated with reliable sealed cartridge internals for easy home servicing and includes travel adjust shims allow you to custom tune your post to dial in your perfect length. The dropper market is dominated by expensive big brand posts and generic catalog shopped posts with different logos. We want to offer something better, a post with class leading specs, innovative useful features AND real value. Want more from your dropper? Get OneUp. FEATURES - Travel adjust shims allow you to custom tune your post to dial in your perfect length. - Cable actuated for easy installation and a simple no bleed remote - Ergonomic remote paddle position - Reliable sealed cartridge internals - User replaceable cartridge only $60 USD - Easy to service at home - 2 year warranty UPDATES - Shortest total length of any dropper - Shortest stack height of any dropper - New upper DU Bushing in the upper collar - Increased bushing overlap and durability - 100-210mm post lengths in 10mm increments. - 20g lighter SPECS - Drop 120mm, 150mm, 180mm, 210mm adjustable*. - Diameter 30.9, 31.6, 34.9 - Routing Internal only Remote Compatibility: - SRAM Matchmaker X - SRAM MMX clamps - Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 - Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M8000 only - 22.2mm Bar Clamp - All other groups 10 speed SHIMANO - Cable clamping remote only (post requires cable stop to be assembled at base of post) - Travel Reducing Shim Reduces travel by up to 20mm. Weight Post Only - (30.9) 120mm 435g / 150mm 480g / 180mm 525g / 210mm 570g - (31.6) 120mm 450g / 150mm 500g / 180mm 545g / 210mm 590g - (34.9) 120mm 545g / 150mm 605g / 180mm 660g / 210mm 710g Remote Only - Remote with 22.2mm Bar Clamp - 46g - Remote with SRAM Matchmaker X / I-spec-EV - 43g - Remote with Shimano I-spec-EV - 43g - Remote with Shimano I-spec II - 41g - Housing and Cable (1300mm installed length) - 50g

When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.

Shimano Ultegra R8000 pedals. - Pro-level performance and lightweight for the enthusiast - The legacy of Shimano design, quality and performance - Carbon-composite body - Extra-wide platform for a more efficient transfer of power - Adjustable entry and release tension settings - 4mm longer axle available - Low stack height - 0.7mm lower than PD-6800 - Model Number: PD-R8000 - Series: Ultegra - Pedal System: SPD-SL - Average Weight: 248 grams

The Perfect Reflection of You. The Power Expert with Mirror saddle combines comfort and performance for riders whether they are podium-seeking crushers or everyday cruisers. The Body Geometry designed Power shape with high-tech Mirror inserts provide sit bone-friendly support road to mountain uses. ATTAINABLE TECH: The Power Expert with Mirror saddle provides riders with a significant reduction in pain-causing pressure when compared to it's foam counterpart, the Power Comp Saddle. Inside the saddle are two tear drop shaped Mirror Technology inserts that target sit bone pressure. Riders around the world will be stoked that the new Expert level Power Saddle with Mirror technology make these benefits more attainable than ever. POWER SHAPE: Our beloved Power shape, with a cutout. The patented Body Geometry design is lab-tested to ensure blood flow to sensitive arteries. Is it a road saddle? Mountain saddle? In short, yes. We hate to say a product works "for everything", but it does. We believe that performance-in saddle speak-means comfort. And whatever shape and material suits you, will be your highest performing saddle. MIRROR TECHNOLOGY: We developed Mirror technology by 3D printing from a liquid polymer to be a perfect reflection of you. Mirror technology allows for infinite density tuning with a single material, but any material is only as good as the designers and engineers that use it. Thanks to our Body Geometry methodology, Retul data, and decades of experience, the 3D-printed matrix is tuned to support the sit bones across a greater area, creating a hammock effect that lets the saddle support your weight, not the tissue around your sit bones. ANY BODY, EVERY RIDE: We know that every body is different, but the issues facing riders in the saddle are the same—sit bone pressure, scar tissue build-up, and blood flow loss. Using pressure mapping, blind comfort studies, and blood flow studies, Body Geometry and Mirror Saddles don't just promise to solve these issues for people-we've proven they do. Plus, this is the first saddle with Mirror technology in additional sizes (130 and 168). ALL AROUND USE: The Power Expert With Mirror saddle uses the same 3D printed technology as the S-Works Power with Mirror except the Expert has 4-way stretch cover to keep mud and debris out of the nooks and crannies of the Mirror lattice. That dirt-shedding feature, plus super durable, yet light weight hollow titanium rails make the Power Expert with Mirror the smart choice for gravel and mountain riders, in addition to those who stick to paved surfaces. Web Bullets - Patented Body Geometry design is lab-tested to ensure improved comfort and blood flow to sensitive arteries. - Mirror technology inserts to provide additinal sit bone relief. - SWAT-compatible mounts molded into the saddle base allow for sleek and integrated storage solutions. - Lightweight and durable hollow Ti rails. - Supportive and lightweight PU foam surrounding the 3D printed inserts. - Size 130mm / Weight: 210g - Size 143mm / Weight: 214g - Size 155mm / Weight: 225g - Size 168mm / Weight: 227g

At the core of this all-around wheelset lies a modern, wide and light aluminum rim. Being the foundations of the wheel, it makes for a balanced width to stiffness to weight ratio. The rim is complemented by DT's proven pawl drive system and a high end build with bladed spokes and alloy nipples. These features make it a premium training wheel easily able to race your mates to the city limits sign. - Spline hub - Straight-pull hub and spokes are radial laced - Includes RWS Eco skewer, tubeless ready tape and tubeless valve

The minimal design of the ShockStop Seatpost blends seamlessly with the aesthetic of modern gravel, road, and e-bikes. Along with the ShockStop Stem, this system works together to reduce fatigue and strain, letting you ride further, faster, and more comfortably. Benefits: - Go further—reducing fatigue from bumps and vibrations - Ride faster—energy that is normally wasted suspending your body is converted into forward motion - Take control—customize your suspension feel to float over obstacles and maintain control Details: - 35mm of active suspension travel - Infinitely adjustable stiffness via pre-load adjustment and swappable springs - Adjusting stiffness / pre-load does not reduce travel - Swappable springs included to accommodate varied rider weight and preference - Optimized linkage geometry provides ultra-responsive suspension feel - Check technical specifications for compatibility What's in the Box: - 1 x ShockStop Seatpost - 2 x springs (1 pre-installed, 1 included in box for increased stiffness) - All required hardware

Built to take on anything, the Speedplay Zero road pedal is uniquely qualified to withstand the demands of everything from all-out racing to the epic grind of a double-century. The stainless steel pedal and integrated cleat system offer peak power transfer and exceptional durability, while the customized fit and dual-sided entry will allow you to crank on the pedals in confidence and comfort. Speedplay is the only pedal system to provide independent fore-aft, left-right, and float adjustability to optimize fit and enhance performance through better biomechanics. Designed specifically to maximize every performance advantage the Speedplay platform offers, Zero is a lightweight race-ready, multipurpose pedal that’s durable enough to go the distance ride after ride. - Weight: 220g (per pedal pair) - Spindle Material: Stainless Steel - Spindle Length: 53mm - Float: Fixed-15º Micro-Adjustable - Cornering Angle: 37º - Bearing: Sealed

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)