Triathlon

Wheel Conversion Caps for Zipp 77/177 Disc hubs. Converts your Zipp 77 or 177 hubs to nearly any frame standard.

Wheel Freehub Kit—XDR Driver Body Kit—Zipp ZR1 Compatible With: WH-202-FTLD-A1, WH-303-F650-A1, WH-303-FTLD-A1, WH-303-FTLR-A1, WH-303-FTUD-A1, WH-303-FTUR-A1, WH-404-FTLD-A1, WH-404-FTLD-B1, WH-404-FTLR-A1, WH-808-FTLD-A1, WH-808-FTLR-A1, WH-SP9-TLD-A1, WH-SP9-TUD-A2, WH-SP9-TUR-A2

X-Fusion's Seal Kits have what you need to freshen up your dropper post and keep dirt out. - 25mm Kit is for posts with 25mm shafts and fits all Hilo posts with 125mm travel except for SL and Strate - 22mm Kit is for posts with 25mm shafts and fits 27.2mm models and 1st generation Hilo posts with 100mm travel in 30.9 and 31.6mm diameters - SL Kit fits SL dropper posts only - Strate Kit fits Strate dropper posts only

The Wolf Tooth 76 BCD chainrings work great on any 76 BCD spider or crankset. These will replace the more expensive rings used on SRAM XX1 spiders or other manufacturer's spiders such as Cannondale. Also a great fit on the Specialized Stout crankset. - Fits any 76 BCD crankset or spider - Drop-Stop® technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Note - Use standard M8 chainring bolts, not the M8.5 bolts included with XX1 spiders. Our patented Drop-Stop tooth design provides superior chain retention, wear life and mud-shedding capability. Compatibility: - These rings fit any SRAM 76 BCD spider or Specialized Stout crankset. Here are instructions on how to measure your BCD. - Threaded for standard M8 chainring bolts. For the XX1 spider, we recommend the 6mm bolts (or any short M8 chainring bolt). For the Stout crankset we recommend the 10mm bolts or the bolts that come with the crankset. - If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). Use Drop-Stop A or B for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains DROP-STOP A Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. Recommendations If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck Tech Specs: - Weight: 30t/45g | 32/51g - Material: 7075-T6 aluminum - Made in the USA

- Shop quality bicycle display and storage stand - Graphite ripple powdercoat over steel construction - Four-Point, Foam rubber end-Cap feet - 2 Piece design disassembles for space-Efficient storage - Standard and extreme models feature welded base construction (Extreme model accepts up to 3 inch tires) - Retail model features flat-Packed, Bolt-Together base construction - Fat rack features flat-Packed, Bolt-Together base construction and will suit tires from 3.8" To 5" with three width positions, 4.25", 4.75" And 5.25"

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Emergency derailleur hanger is designed to temporarily replace a hanger that is damaged or broken on a ride. Anchored in place by the rear quick-release it allows the use of most gears, and more importantly, for the bike to be ridden instead of pushed or carried. - Fits most frames that use a quick-release rear hub - Provides nearly complete shifting range - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Flat head screws from Wheels Manufacturing.

Loose ball headset bearing retainers. - Grade 300 bearings

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing Axle Spacers help you dial in your hub spacing to ensure correct fit and side-to-side spacing in the rear triangle without having to alter the wheel's dish. - Spacers come in bags of 20

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt Note: Same hanger as Wheels Mfg DROPOUT-25.

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

This Wheels Manufacturing Shimano/SRAM Single Speed Conversion Kit includes chain guides for carefree single speeding. Large chain guides sandwich the cog with diameters slightly larger than the cog to keep the chain from hopping off the rear cog. Includes: - (2) - 9mm chain guides - (6) - 3mm spacers - (2) - 1mm shims - (4) - 0.3mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any ½ x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain Note: Does not work acceptably with any 10 or 11-speed chain

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

Vittoria's Roadster tire is a high-mileage urban offering with a negative tread that offers low rolling resistance and high traction. - Wire bead - Easy-rolling tire for road use - 650 grams

Don't let flats stop your ride! The legendary combination of durability, protection, and run-flat performance of Vittoria Air-Liners, made for your favorite tubeless-ready road tires! The Vittoria Air-Liner system provides unmatched bump compliance and impact protection, while ensuring bead lock at lower pressures. In the event of air-loss, the Vittoria Air-Liner Road system is designed for run-flat use. The insert increases the safety of your tubeless set-up by keeping the tire in place even in case of puncture - No risk to ride on the wheels! The Vittoria Air-Liner Road system is compatible with all tubeless road tires on the market. The lightweight material absorbs no sealant, while the proprietary Vittoria tubeless valves eliminates valve clogging. Whether you are training, touring, exploring, or racing, the Vittoria Air-Liner Road system will provide peace of mind and protection for the ride ahead. The Air-Liner Road bag contains: - One Air-Liner Road insert - Two Multiway valves Sizing recommendation: - Small, 700 x 23-26mm - Medium, 700 x 27-29mm - Large, 700 x 30-32mm

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Swank is retro-value for modern times, carrying the freedom of youth into the excitement and unpredictability of tomorrow. Swank’s light frame is designed for a no-slip fit and is equipped with shatterproof, scratch-resistant lenses covering a spectrum of popular colors.

Sporting a fit made for those who take full advantage of life, Swick is vying to be your part of your adventure. Call it sweet. Call it sick. It’s Swick. - Swick has a light, durable frame and shatterproof, scratch-resistant lenses along with a no-slip fit perfect for active lifestyles.

Elevate your active lifestyle with Sanctum, the sports sunglasses that seamlessly integrate style, comfort, and performance into your everyday adventures. Sanctum enhances Tifosi's classic Swick model but with a larger lens and fit. Whether you're tackling trails, enjoying a leisurely bike ride, or pushing through intense workouts, Sanctum is the perfect companion to elevate your active endeavors.

Rivet provides full coverage protection with cutting edge design. It's frame is extremely light weight with nose and earpieces that are adjustable for a custom fit. Rivet in Crystal Smoke is equipped with Enliven lenses that fine tune the wavelengths of light that matter most; making greens, blues, and reds pop with definition.

Aerodynamic lines and engineered ventilation specialize the Crit for endurance sports. Adjustable arm and nose pieces specialize the Crit for you. - All Tifosi lenses provide 100% protection from harmful UVA and UVB rays and are constructed from scratch-resistant, shatterproof polycarbonate - Grilamid TR-90 frame is made of an incredibly light and durable nylon material that resists chemical and UV damage - Adjustable, hydrophilic rubber nose and ear pieces allow for a custom fit, limiting slippage and increasing comfort - Optically decentered lenses eliminate distortion and prevent unwanted magnification - Vented lenses increase airflow to prevent fogging and help keep you cool - Tifosi's proprietary glare guard lens coating reduces eye strain

Keep up in Kilo! No matter the distance ahead, Tifosi’s newest lightweight pair of endurance sunglasses have got you covered. Inspired by athletes of endurance sports like cycling and running, the Grilamid TR-90 frame provides durability while remaining ultralight. Kilo’s hydrophilic rubber ear and nosepieces offer a no-slip grip so that the sunglasses will stay in place no matter where the road takes you. And did we mention? The polycarbonate lenses are shatterproof and scratch-resistant with vents to prevent fogging! Kilo in Blackout with a Polarized lens helps to eliminate glare so that you can be ready for anything. - Frame: Light & Durable Grilamid TR-90 - Features: Vented lenses, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Lens: Smoke Polarized – Shatterproof polycarbonate glare-reducing lens - Fit: Medium-Large | Weight: 31G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Sledge Lite in Matte Black takes all the performance of Sledge and packs it into a streamlined, lighter design. The oversized ergonomic face-fit features three vented lens options that provide maximum coverage with adjustable temples. Sledge Lite caters to comfort and drives performance. Slay in Sledge Lite. - Frame: Light & Durable Grilamid TR-90 - Lens: Smoke / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Vented lenses, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-XL | Weight: 35.5G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Sledge Lite in Matte White takes all the performance of Sledge and packs it into a streamlined, lighter design. The oversized ergonomic face-fit features three vented lens options that provide maximum coverage with adjustable temples. Sledge Lite caters to comfort and drives performance. Slay in Sledge Lite. - Frame: Light & Durable Grilamid TR-90 - Lens: Smoke / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Vented lenses, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-XL | Weight: 35.5G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Slay in Sledge. Sledge caters to comfort and drives performance. The oversized styling provides maximum coverage and an ergonomic face-fit. This Sledge in Matte Black features a Clarion Red Fototec vented lens that adjusts tint depending on surrounding light conditions. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Red Fototec – Shatterproof polycarbonate lens that repels water with a tint that starts nearly clear and darkens in sunlight to a smoke tint with red mirror - Features: Vented lenses, fully adjustable ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-Large | Weight: 37G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Slay in Sledge. Oversized styling provides maximum coverage and an ergonomic face-fit. Featuring three vented lens options and adjustable temples, Sledge caters to comfort and drives performance. - Frame: Light & Durable Grilamid TR-90 - Lens: Smoke / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Vented lenses, fully adjustable ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-Large | Weight: 37G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Carve out some time to get outside in Slice! The frameless shield lens provides an unrestricted view with total protection from harmful UV rays. Be ready for whatever your environment throws at you with three lenses: Smoke for sunny conditions, AC Red for better contrast on partly cloudy days, and clear to shield your eyes from the elements when a tint is not needed. - Frame: Light & Durable Grilamid TR-90 - Lens: Smoke / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Rimless shield, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Small-Medium | Weight: 29G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Tsali equips you with the protection you need. Tsali comes with three interchangeable polycarbonate lenses which are shatterproof and provide 100% UV protection. They are extremely light weight with nose and ear pieces that are adjustable for a custom fit. They are designed to stay in place at your most energetic with the use hydrophilic rubber, a material that increases grip as you sweat. - Frame: Light & Durable Grilamid TR-90 - Lens: Smoke / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Rimless shield, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Small-Medium | Weight: 29G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

The Vero takes all the style and performance of the best-selling Veloce and packs it into a smaller frame. Perfect for those with smaller faces, the Vero is great for taking on your run, cycling through town, and chasing personal records. - All Tifosi lenses provide 100% protection from harmful UVA and UVB rays and are constructed from scratch-resistant, shatterproof polycarbonate - Grilamid TR-90 frame is made of an incredibly light and durable nylon material that resists chemical and UV damage - Adjustable, hydrophilic rubber nose and ear pieces allow for a custom fit, limiting slippage and increasing comfort - Optically decentered lenses eliminate distortion and prevent unwanted magnification - Vented lenses increase airflow to prevent fogging and help keep you cool - Tifosi's proprietary glare guard lens coating reduces eye strain - Case included

Crit Fototec is equipped with a photochromic Clarion Red lens, a tint that goes from nearly clear to a red mirror with a smoke tint, providing the perfect light day or night. Crit is a sunglass designed for endurance sports. It offers an aerodynamic design and engineered lens ventilation, which make it perfect for long rides on a bike or runs on the track. The adjustable arm and nose pieces are made so that you can customize them to securely fit your face shape. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Red Fototec – Shatterproof polycarbonate lens that repels water with a tint that starts nearly clear and darkens in sunlight to a smoke tint with red mirror - Features: Vented half frame, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-Large | Weight: 31G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Rail Race takes the iconic Rail sunglasses to new heights, specifically tailored for cycling and baseball enthusiasts. Building upon the success of the original Rail, Rail Race is a 2-lens interchange model that combines style and performance to elevate your outdoor experience.

Rail XC in Crystal Clear takes the same performance as Rail, but streamlined in a smaller lens and lighter design. Rail XC's rimless shield keeps eyes protected from debris while still offering maximum airflow. Rail XC comes with a shatterproof Clarion Blue Fototec lens with a tint that gets darker with sunlight exposure. The perfect companion for road and gravel cyclists.

Take on any trail in Rail Crystal Blue. Rail takes the need for ventilation in cycling glasses and combines it with an oversized rimless design that offers increased coverage. Its frame is lightweight for all-day comfort and the shatterproof lenses ensure long-term use. Rail’s rimless shield frame keeps eyes protected from debris while still offering maximum airflow, whether you’re pedaling the blacktop or trailing under the pines. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Blue / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Rimless shield, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Large-XL | Weight: 32G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Rail is equipped with a Clarion Red Fototec lens, a tint that goes from nearly clear to a red mirror with a smoke tint–providing the perfect light day or night. Rail’s oversized rimless design offers the most coverage of all Tifosi cycling eyewear. Its frame is lightweight for all-day comfort and the shatterproof lens ensures long-term use. Rail’s rimless shield frame keeps eyes protected from debris while still offering maximum airflow, whether you’re pedaling the blacktop or trailing under the pines. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Red Fototec – Shatterproof polycarbonate lens that repels water with a tint that starts nearly clear and darkens in sunlight to a smoke tint with red mirror - Features: Rimless shield, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Large-XL | Weight: 32G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Take on any trail in Rail White / Black. Rail takes the need for ventilation in cycling glasses and combines it with an oversized rimless design that offers increased coverage. Its frame is lightweight for all-day comfort and the shatterproof lenses ensure long-term use. Rail’s rimless shield frame keeps eyes protected from debris while still offering maximum airflow, whether you’re pedaling the blacktop or trailing under the pines. - Frame: Light & Durable Grilamid TR-90 - Lens: Smoke / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Rimless shield, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Large-XL | Weight: 32G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Sledge Lite in Crystal Smoke takes all the performance of Sledge and packs it into a streamlined, lighter design. The oversized ergonomic face-fit features three vented lens options that provide maximum coverage with adjustable temples. Sledge Lite caters to comfort and drives performance. Slay in Sledge Lite. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Blue / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Vented lenses, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-XL | Weight: 35.5G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Sledge Lite in Crystal Smoke takes all the performance of Sledge and packs it into a streamlined, lighter design. The oversized ergonomic face-fit features three vented lens options that provide maximum coverage with adjustable temples. Sledge Lite caters to comfort and drives performance. Slay in Sledge Lite. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Blue / AC Red / Clear – Shatterproof polycarbonate interchange lenses for bright and low light scenarios - Features: Vented lenses, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-XL | Weight: 35.5G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag

Sledge Lite in Matte Black takes all the performance of Sledge and packs it into a streamlined, lighter design. The oversized ergonomic face-fit features three vented lens options that provide maximum coverage with adjustable temples. Sledge Lite caters to comfort and drives performance. Slay in Sledge Lite. - Frame: Light & Durable Grilamid TR-90 - Lens: Clarion Red Fototec – Shatterproof polycarbonate lens that repels water with a tint that starts nearly clear and darkens in sunlight to a smoke tint with red mirror - Features: Vented lenses, fully adjustable nose & ear pads, hydrophilic rubber ear and nose pads that increase grip the more you sweat - Fit: Medium-XL | Weight: 35.5G - Included: Zippered Hardshell Case & Microfiber Cleaning Bag