Trailers/Strollers

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

Fox Dust Wiper Kit is standard equipment on Fox Forks and give them a smooth feel.

- Headset Microspacer - .25mm height each

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks

This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

A solid choice for 1-1/8in frames, the Orbit Equipe features a sturdy steel lower cup for maximum durability. The top cup is forged alloy, with an alloy top cover. Inside are two low maintenance, easy-to-replace sealed cartridge angular contact bearings. - Bearing Type: Cartridge - Weight: 117g - Crown Race: 30 - S.H.I.S. Lower: EC34 - S.H.I.S. Upper: EC34 - S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

Now Available! Keep charging cables organized while your ebike is safely parked thanks to the RAKK 2.0 E bike stand. Based on the wide body, deep wheel cradle, large tire contact pulleys, and long support arm of the RAKK 2.0, the RAKK 2.0 E features a secure tray for the e-bike charger plus cable magnets to organize the plugs. RAKK 2.0 E bike stand easily fits oversized e-bike wheels and tires, supporting bikes up to 75lbs with stability and ease of use. The RAKK design supports bicycles by contacting only the tire and is compatible with a wide array of bike styles, frame sizes and wheel/tire sizes. Park your bikes anywhere in the room by the front or rear wheel with confidence and stability. E-Bike battery charger not included - shown in photos for reference only. Features: - E-bike specific bike storage stand accommodates tire sizes (width): 23mm-4.5", tire diameter 20"-29" (20"x1.5” tires or wider). - Adjustable charger tray keeps valuable ebike charger and cables clean, safe and organized. - Magnetic cord organizers keep the charger cord off the ground and out of harm's way. - Securely park bikes up to 75lbs. - Versatile design allows for bike parking with front or rear wheel without risk of scratching rims or spokes - Accommodates tires sizes (width): 23mm-4.5", tire diameter 20"-29" (20"x1.5” tires or wider). - 3-Position pulley accommodates multiple wheel sizes and bikes with fenders. - Pulley arm folds flat to a compact unit for travel or storage when not in use. - Spring-loaded design is hands-free – simply roll the bike into the wheel slot and the swing arm holds securely. - Rubber feet with large contact patch maximizes floor grip. - Durable powder-coated steel maintains a long-term clean finish. - Plastic-free, 100% recyclable packaging. - Assembly required (tool included). - 3-Year Warranty - Available Accessories: Wheel Adapter for bikes with 16" wheels.

Premium fine knit tee for maximum comfort and soft feel. Combining classic Fox style with supreme comfort, the Fox Head Premium Tee is lightweight and soft and features side-seam construction to help keep its shape no matter how many times you wash it. Made from premium fine-knit jersey material, this comfy shirt is sure to become an instant fav in your t-shirt collection. Key Features and Specifications: - Men's crewneck tee - Maintains the integrity and structure, wash after wash - Tailored for a slimmer look - Ultra-soft texture - Lightweight feel (155 g) - Premium fit - Screen print artwork - Length (HPS): 29.5", size medium Materials: 100% cotton combed ringspun with Biancalani 30/1 side seam jersey, 155 g Care: - Machine wash cold - Tumble dry low heat - Do not wring or twist - Do not bleach - Do not iron - Do not dry clean

Key Features: - Brushed cotton fabric is soft, durable, and warm - Perfect weight for layering under fleece or outerwear - Two front chest pockets - 85% recycled polyester, 15% cotton jersey, 155 g TruDri and drirelease® Comfortable fit, classic flannel shirt Flannels never go out of style, and the Traildust Flannel Shirt is a comfy addition to your flannel arsenal. Soft, durable, and warm, this flannel is the perfect weight to layer over a tee or under your favorite jacket or hoodie.

Technical mountain bike shorts with liner The Ranger Lined Shorts with Liner pack trail-specific technology into a casually styled short that performs both on and off the bike. The TruMotion® stretch ripstop fabric ensures maximum performance and superior durability. The waist adjusters make it easy to adjust the fit on the fly and while the inner waistband features TruDri® technology to move moisture away from your skin and keep you cooler and drier. A 2-layer, removable liner to bump up the ride comfort. The liner is removable, but make sure you love them before cutting them from your shorts as liners must be unaltered should you need to return them. Key Features: - Dual-density chamois liner for comfort on long rides - Ripstop fabric for improved durability - Moisture-wicking waistband - DWR treated for water resistance Specifications: - Stretch ripstop fabric maximizes performance on every ride - Relaxed fit for on-bike performance and off-bike styling - Removable liner with dual-density chamois for improved saddle comfort - Snap closure and adjustable side cinch for a secure fit and on-the-fly adjustments - TruDri® lined waistband moves sweat and moisture away from the body keeping you comfortable and dry - Two zip-closure hand pockets - DWR finish sheds moisture, dirt, and debris - Zipperless design enhances comfort while riding Materials - 92% nylon, 8% spandex 2-way warp stretch Fit The Ranger Fit: - A regular fit built to perform on the bike and look causal while off it. Pants and jackets tailored in the ride position for on-bike comfort.

Be ready for any terrain with this Garmin Edge mountain bike mount designed specifically for bikes with short stems. It’s ideal for off-road riding when you may not want your Edge bike computer mounted in front of your handlebar.

Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling.

Giant's inner tubes are made from high-quality, standard weight rubber so you can keep on rolling. These tubes fit older Schwinn bicycles with 24-inch wheels. - For use in tires with an ISO diameter of 540mm

Giant's thorn tubes feature thicker rubber that prevents some punctures and flats.

-Tapered OD2 MTB headset (2012-2016)

Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

5-serving polyethylene gel flask - High-density polyethylene with molded finger grips - Secure cap to keep dust out - Easy to clean - Holds five Hammer Gel servings - 2.25" x 5.75" - 5.82oz / 172.11 mL DESCRIPTION: An economical and efficient way to carry Hammer Gel, Perpetuem, or Sustained Energy. Easy to clean, this flask is dishwasher safe (top rack).

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

Brake Pads for your Dominion A2 come in 2 flavors: Sintered T100 - Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 - Friction material provides enhanced modulation and silent operation.

The good friction. Speed and confidence come with better braking. Refresh or update the best brakes in the world with some new pads! Brake pads for your Dominion A4 come in 2 flavors: Sintered T100 Sintered metallic friction material provides maximum stopping power in wet and dry conditions. Semi-metallic T106 (aka free-range organic) friction material provides enhanced modulation and silent operation. Gluten-Free. Includes 2 pads, retention screw.

Key Features - 10, 11 and 12-speed compatible - Sealed stainless Steel cartridge bearings - Hub shell machined from a single forged aluminum billet - Standard 6 bolt disc fitting - 4 Pawl ratchet system with 44 tooth engagement (8.2 deg) - Larger spoke flange to enable stiffer wheel builds - Unsurpassed reliability - Available in 170/177 and 190/197mm widths (specific hub shells)

Jagwire's Tube Tops are installed over your cable housing sections to provide a soft bumper to deaden the impact of cables hitting your frame while riding, minimizing rattles and protecting your frame's fine finish. They feature a split seam so they're easy to install by hand with no cable disassembly required. Just open the Tube Top's seam, put it on the housing where it's rubbing the frame, rotate the seam so it faces out and release. The Tube Top will stay in place and keep your bike quiet and safe.

Jagwire's Sport Slick Galvanized Shift Cable is a fine shift cable made of galvanized steel for optimum shifting performance and durability.

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Basics brake pads offer a durable, reliable replacement to get bikes back on the road. - All-weather compound - Compatible with caliper style brakes all-weather compound - 50mm long - Color: Black - Intended Brake Type: Caliper - Pad Attachment Style: Bolt-In (Caliper) - Pad Type: One Piece - Rim Compatibility: Standard

Jagwire's Mountain Pro Inserts are the correct replacement pads for Jagwire's Mountain Pro brake shoes (sold separately). These pads feature Jagwire's tried-and-true compound for excellent stopping power and durability.

Many frames use internal cable routing for a tidy appearance and improved aerodynamics. In some cases, this can cause unwanted rattling sounds when riding over rough surfaces. Jagwire's Internal Housing Damper slides over brake and shift housing or hydraulic hose to reduce this noise. - 10mm outside diameter - Compatibility: 4.0-5.0mm brake housing, shift housing, and hydraulic hose

Jagwire's Road Pro Inserts (Campagnolo) are a nice upgrade for Campagnolo sidepull brakes. They're made of Jagwire's Pro Series compound in three versions for excellent stopping power in all conditions and with aluminum and carbon rims. Choose from Friction Fit and Click Fit for Campagnolo regular and Skeleton brakes respectively.

- Replacement cable for the Jagwire Pro Dropper kit - 0.8mm inner cable is more flexible and has lower friction than typical shift inner cables - An easy way to reduce the force required to activate a dropper post remote lever - Perfect for dropper seatposts with "stealth" cable routing and tight housing bends - Includes 2x heat-shrink shims - For use with dropper seatposts ONLY - Length: 2000mm

Slick stainless cables undergo a polishing process to further remove imperfections. This creates a smoother surface with lower friction than PTFE-coated cables. With no coating, these are highly durable and compatible with all performance housings and lubricants. Typically used on high-end bikes, by riders wanting improved performance. Pro Polished cables eliminate the need for flaky coatings with an innovative polishing process to reduce friction and improve performance. - Polished stainless steel construction for low friction - Compatible with all performance housing and lubricants - Cables are tinted gold for easy identification

Jagwire Sport Semi-Metallic disc brake pads are a great improvement from OEM. They feature a high-performance semi-metallic compound that blends the low-noise of a resin pad with the durability of a metallic pad. Mounted to a steel backing plate, these are a great all-purpose pad.

Inline adjusters make on-the-fly derailleur cable tension adjustments safe and easy. - Indexed shifter adjustment, fits 4.0mm housing; not recommended for use with brake systems - Compact design improves performance when used on curved housing segments

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Formula disc brakes.

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max combo mount is compatible with GARMIN Cycling Computers smaller than EDGE 1000, 1030 style (example EDGE 820) - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 60g

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

The Kenda Street BMX Series Tires are constructed of a steel bead and are available in a variety of sizes.

Kenda Crusier tire is ideal for casual paved riding or soft conditions like sand.

Kenda K50 tires are all-purpose tires with short knobbies. - Classic design for replacement and repair

- Kenda model K40 - Intended for street use

The K40 is a reliable tire for recreational use. Its grooved tread provides traction on pavement. Kenda K40 Street tires are designed for a variety of paved road conditions while providing comfort at a economical price - Fits EA3/E3/650A Rims typically on English 3 Speed bikes

Kenda K126 Street tires are designed for a variety of paved road conditions while providing comfort at a economical price. Fits older Schwinn Sting Ray 20" wheels.

The S-6 Black Steel Tire in K23 Tread is a great tire for any road bike. - K23 tread pattern - Made from quality Kenda rubber - Wire bead

The Kenda Kiniption tire features a diamond shaped knob designed for 26" BMX cruisers, dirt jumping, and urban assault style mountain riding. - Bead-to-bead diamond tread

Replacement lock cores Kuat Racks lock systems. Comes with lock cores, keys, and 1 core removal tool. This part is not made for Kuat's NV rack, Sherpa rack, or any other hitch mounted rack.

He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.