Storage

Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm

Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing. The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems. These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs. With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.

5-serving polyethylene gel flask - High-density polyethylene with molded finger grips - Secure cap to keep dust out - Easy to clean - Holds five Hammer Gel servings - 2.25" x 5.75" - 5.82oz / 172.11 mL DESCRIPTION: An economical and efficient way to carry Hammer Gel, Perpetuem, or Sustained Energy. Easy to clean, this flask is dishwasher safe (top rack).

A flat won't ruin your ride when you have Lezyne's Classic Kit. It contains 8 vulcanizing patches, glue, an emergency tire boot and a stainless-steel tube scuffer.

The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes

Wheel magnet for all CatEye cycle computers

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Cadence Magnet for all CatEye computers that record cadence.

- Made in the USA - Enables Take a Look Original Eyeglass Mirror to fit helmets - Does not work with Take a Look Compact Eyeglass Mirror

CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

- Stretch web secures those hard-to-hold items - Great for any rack - 4 easy-to-handle molded hooks attach anywhere - Dimensions 11" x 11"

The NiteRider Adjustable Angle Tail Light Strap Mount was specifically designed for our flagship tail light, the Sentinel. It allows you to fine-tune the mounting angle of the light to display the projected Laser Lanes even and parallel on the ground. It's an easy on and off non-slip tail light mount that also features a grooved contact pad that makes this the 'go to' mount for riders using aero seat posts. System Compatibility - Sentinel - Solas - Sabre - CherryBomb

The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.

Replacement fit system assembly for Propero 3 helmets.

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws

Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.

All of our head light mounts deliver rock solid mounting but for those that demand the most rigid set up, the NiteRider Lumina Handlebar Clamp Mount is here to deliver a high degree of performance and stability. Fits a max bar diameter of 35mm. SYSTEM COMPATIBILITY - Lumina Series - MiNewt Cordless Series - Mako Series WARRANTY - This NiteRider accessory is backed by NiteRider’s lifetime warranty that covers any defects in mechanical components (housings, covers, mounts and fasteners)

Replacement lock cores Kuat Racks lock systems. Comes with lock cores, keys, and 1 core removal tool. This part is not made for Kuat's NV rack, Sherpa rack, or any other hitch mounted rack.

He's cheap and a little rough around the edges. Not the kind of guy you'd want to introduce to your business associates, but he's dependable and always makes for a good time. The Dirtbag is the most affordable rack on the market, it's easy to use and can be easily bolted to just about anything.

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

Increase your line of sight with the NiteRider Lumina Helmet Mount. By mounting your head light onto your helmet, it’ll allow you to see farther into your turn or wherever your head turns. System Compatibility: - Lumina Series - MiNewt Mini Series - Mako Series

Convert your K-Edge Garmin Computer Mount to be a Computer + Action Camera combination mount. Works with any camera that utilizes the GoPro sytle interface, including GoPro Hero, Garmin VIRB, and Shimano CM-1000. - Camera Adapter mount with GoPro style interface - Fits K-EDGE Garmin Mounts (K13-500, K13-505, K13-560) - Locks GoPro, Shimano, VIRB style cameras underneath Garmin Computer. - Centers camera in out of site position - Improves video clarity by removing plastic mount shake - Colors: Anodized Black - Weight: 14grams *Note: Garmin VIRB requires the GoPro adapter that is included in the box with the VIRB.

This NiteRider Adapter is sold separately from K-EDGE “Combo Mount." - Precision Machined 6061-T6 Aluminum - Anodized Gunmetal - Converts a NiteRider Rail Interface to adapt K-Edge GoPro Mounting Interface - Enables compatibility with K-Edge GoBig Mounts and Combo Mounts - 2x M4 Mounting bolts with Nylok included - Compatible with Lumina Series, Mako Series - Weight: 11.5 grams

The all-in-one tool kit for faster cleaning and drying of your CamelBak Crux reservoir.

1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.

Replacement Boa® Snap 3 dials for S-Works 7 Road shoes. - Includes one cartridge dial assemble and lace. - Left- and right-specific.

Hydration on the road is critical, and the Direct Mount Reserve Rack helps ensure that you have adequate supplies of H2O or your liquid nutrition of choice right there when you need it. This simple water-storage solution holds up to two water bottles, provides a sleek and aero profile, and mounts easily under any SWAT-compatible saddle. - Uniquely designed to bolt directly under a saddle with SWAT-compatible mounts. - Holds up to two water bottles behind the saddle for a more aerodynamic profile.