Recumbent parts

- Steel cups - Steel retainer bearings - Available in chrome or black - S.H.I.S.: EC32/25.4-24tpi|EC32/27 - Steerer Dia: 25.4mm - Cup Dia: 32.5mm

- Recreational tire with horizontal grooves for traction - Size: 26 x 1 3/8 - ISO 597

- Urban tire with raised center for reduced rolling resistance - Size: 26 x 1 3/4 - ISO 571

Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

The Product that Started a Tubeless Revolution Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant. Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires. - First choice of riders around the world for tubeless conversion and flat prevention - Seals punctures up to 1/4-inch (6.5mm) quickly - Stays liquid 2-7 months for long-lasting protection - Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C) - Natural materials, safe for the environment - Can be injected through valve stems with removable cores compatible with tubes and tubular tires

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

Specialized's Big Roller tire gives younger riders advantages that adult size bikes are getting. Wider tires, along with a new tread design allows for maximum traction and stability in many riding conditions. This leads to more fun and better confidence! - Casing: 60 TPI - Bead: Wire - Compound: 60a - 20 x 2.8"; Max Ride 20psi / Max Install 35psi; approximate weight 670g - 24 x 2.8"; Max Ride 25psi / Max Install 35psi; approximate weight 835g

Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.

Multi-Terrain tire designed for the GLOBE cargo bike family. The tire is great for around town, daily commuting, weekend travels, and wherever exploration takes you. Smooth center tread rolls silently while tall and strong shoulder knobs provide confidence if your route takes you off road. The casing is designed to carry high loads and has extra protection to prevent flats. - Bead: Wire - Flat Protection: Flak Jacket - 20 x 3.5, psi 15-35, approximate weight 1200g - Globe Haul replacement tube, 20 x 3.5-4.5 Schraeder Valve, SKU 03123-1000

Specialized's Comp Multi Stem is forged and machined from 6061 aluminum for stiff, responsive handling. The 6-degree rise puts your bars in a position for improved control and the 31.8mm handlebar clamp is compatible with composite and aluminum handlebars.

With the Crossroads tire, we redesigned our popular tread, making it the best multi-terrain tire out there. Whether on your mountain bike or town bike, this tire is ready for the rigors of everyday street life. And with Flak Jacket flat protection, plus a rugged casing and smooth-rolling tread, you'll get around town easily without worrying about flats or traction on parkways and cobbles. - Casing: 60 TPI - Bead: Wire - Compound: 60a - Flat Protection: Flak Jacket - 26 x 1.9", PSI 35-65, approximate weight 580g

With the Crossroads Armadillo tire, Specialized redesigned their popular Crossroads tread, making it the best, most robust multi-terrain tire out there. Whether on your mountain bike or town bike, this tire is ready for the rigors of everyday street life. And with maximum flat protection from our Armadillo technology, plus a rugged casing and smooth-rolling tread, you'll get around town easily without worrying about flats or traction on parkways and cobbles. - Casing: 60 TPI - Bead: Wire - Compound: 60a - Flat Protection: Armadillo - 26 x 1.9", PSI 35-65, approximate weight 680g

3D-forged and CNC-machined from 6061 aluminum the Future Stem Comp is optimized for use with all Future Shocks. It's also compatible with our Specialized accessory mount for seamless integration. - 3D-forged and CNC-machined, 6061 aluminum, Future Shock-optimized stem. - Available in 6-degree angles and 60, 70, 80, 90, 100, 110, and 120mm lengths. - Compatible with the Specialized accessory mount.

The adjustable cargo rail is the behind the scenes workhorse that makes the Haul LT electric bike magic. Set them up for whatever you need to get more into it. Strap on your cargo bags, panniers or use them as passenger handlebars; with the adjustable cargo rail, the Haul LT is your oyster. - Customizable support for Cargo bags, panniers with vertical mounting points for locks, bottle cages, and other Globe electric bike accessories. - Designed for frictionless compatibility with Haul LT. - Intended for use with the Cargo Side Bags or passengers, not a loaded platform. - Able to be used as handlebars for passengers. - 3 width options and 4 height settings. - QR pins for easy adjustment or removal. - Requires tools for assembly not included with purchase.

These rear rack-mounted adapters provide simple and secure mounting points for panniers like the Coolcave. The low mounting position opens the top rack platform for other accessories like the Rack Customization Kit or MIK adapter. *Third-party panniers not tested for guaranteed compatibility - Designed for frictionless compatibility with the Globe Haul ST and up to 2 pairs on Haul LT* - *Not compatible with Globe Pegs due to shared mounting location. - Accepts most standard bicycle panniers, such as the Specialized Coolcave. - Includes two pannier adapters (one for each side of the rack) and all required hardware. - 8kg (18lb) load capacity per side. - Additional tools required for rear installation (not included).

The Globe Haul LT electric bike running boards will help keep your passengers and your cargo rock steady as you zip through your day. This is support where you need to help create a stable ride and get more into it. - 2 full-length running boards - Designed for frictionless compatibility with Haul LT - 66 lbs max capacity per side - Includes all required tools for assembly - Sustainable, bamboo platform with grip tape top

The Rear Wheel Cover is a critical safety component for carrying passengers on the Globe Haul ST. The easy-to-install guards cover openings on the frame and rear rack to prevent fingers, toes, and clothes from getting too close to the moving wheel and chain. They also protect from dust and grease to keep riders and bikes cleaner. **For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. ** - Compatible with Haul ST. - Includes two upper fender covers and two lower wheel covers. - Easy toolless installation.

The Ground Control Grid 2Bliss Ready T7 uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. The GRID casing provides a light and supple trail construction with additional sidewall protection for durability and sidewall stability. To top off this build we use our T7 compound to maximize grip and damping. - 27.5 x 2.35", PSI 25-50, approximate weight 800g. - 27.5 x 2.6", PSI 25-50, approximate weight 850g. - 27.5 x 3.0", PSI 25-50, approximate weight 1050g. - 29 x 2.2", PSI 25-50, approximate weight 820g. - 29 x 2.35", PSI 25-50, approximate weight 845g. - Bead: Foldable. - Butyl wrapped bead = 2Bliss Ready. - Casing: 60 TPI, light and durable XC/Trail construction with additional sidewall protection and stability. - Compound: GRIPTON T7.

The Ground Control Sport uses an extremely versatile tread pattern which can be used from cross country race to trail, it rolls fast with exceptional amounts of confidence and grip. Our Block-In-Block design uses a taller adaptable inner block to pierce the ground and claw for traction. The larger outer structure supports the inner block for additional speed, traction, support and stable handling. - Casing: 60 TPI - Bead: Wire - 26 x 2.35", PSI 25-50, approximate weight 730g

Replacement fit system assembly for Propero 3 helmets.

The Hemisphere is a modern, versatile, and durable trekking tire with tough Flak Jacket puncture protection and a bold tread that delivers control on loose surfaces. This tire's serial center blocks roll easily on paved surfaces, while also providing off-road traction through wide-spaced shoulder blocks that bite into soft ground. Altogether, the Hemisphere will excel on streets and bike paths alike. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 26 x 1.95", PSI 35-65, approximate weight 880g

Tool-less, 3-position training wheel installation/removal system. - Closed-cell foam tires - Tubular steel arms - Compatible with 2013-present Hotrock 20-inch models only

The MIK Adapter Plate is an ideal accessory if you want to carry your essential items around quickly and easily. It will unlock your ability to customize your storage options on your rack. It’s compatible with removable bicycle accessories and suitable for luggage carrier racks for the MIK system or MIK carrier plate. The MIK Adapter Plate is a must-have for your Vado, Como, or Tero. - Attaches to a wide variety of accessories, including the Turbo Basket and various Basil accessories. - Connects securely to MIK and MIK HD racks or the MIK carrier plate (not included). - 15kg max. load when used on the MIK HD rack. - Allows for fast and tool-less installation and removal. - Includes MIK stick key for increased security.

A little cold or windy weather in the forecast? No problem. When full shoe covers are overkill, pull on our Neoprene Toe Covers for just the right amount of warmth and protection. Perfect for short winter rides or longer shoulder season excursions, the stretchy, weather-resistant design is compatible with all cleat types. Abrasion-resistant panels add durability, so feet stay comfortable ride after ride. - Abrasion-resistant bottom and toe panels increase the covers' lifespan. - Universal cleat opening means covers are compatible with both road and mountain shoes. - Fabric Content: 100% Polyester

Your road shoes weren't made for walking, but that's just what you did. We can't blame you, though, especially when installing a Replacement Road shoe Heel Lug is so darn easy. Just install these on your S-Works Road shoes (2012 and earlier), and feel the tread under your feet again. - Replacement tread for S-Works 6 and Sub6 - Heel Lugs Only - Sold in pairs; with screws

Replacement tread for S-Works 7 Road shoes. - Heel Lugs only. - Sold in pairs with screws.

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt.

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt. - Casing: 30 TPI - Bead: Wire - Compound: 70a for 12", 16", 18," and 20" Compound: 60a for 24" - Flat Protection: Flak Jacket for 12", 16", 18", and 20" - 18 x 2.0", PSI 35-65, approximate weight 460g

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt. - Casing: 30 TPI - Bead: Wire

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt. - Casing: 30 TPI - Bead: Wire

When your ride varies from skate parks to city streets, and usually ends with a session at the trails, the Rhythm Lite is the obvious tire of choice. A fast-rolling center section keeps things moving, while slightly larger and deeper shoulder knobs provide enhanced traction in the dirt. - Casing: 30 TPI - Bead: Wire

An aggressively styled youth tire for all-condition riding, our Roller tire is the perfect tire for your kids to learn how to shred. - Casing: 22 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 12 x 2.125", PSI Max 40, approximate weight 280g

An aggressively styled youth tire for all-condition riding, our Roller tire makes the perfect tire for your kids to learn how to shred. - Casing: 22 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 16 x 2.125", PSI Max 40, approximate weight 420g

An aggressively styled youth tire for all-condition riding, our Roller tire makes the perfect tire for your kids to learn how to shred. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 20 x 2.125", PSI 35-100, approximate weight 580g

An aggressively styled youth tire for all-condition riding, our Roller tire makes the perfect tire for your kids to learn how to shred. - Casing: 30 TPI - Bead: Wire - Compound: 70a - Flat Protection: Flak Jacket - 24 x 2.125", PSI 35-100, approximate weight 610g

The Control Stem is tailor-made with a 35mm clamp to partner with the Control SL bar, delivering more stiffness and more control—coming in at an incredibly light 100g (50mm). Turns out, you can have it all. LIGHT: Where light weight and stiffness meet. Its high-quality 7075 Alloy and Ti hardware and featherweight function make the Control SL Stem a perfect match for race-day setups. STIFF: Made with the same integrity as the suite of stiff Roval components, the Control SL provides race-ready rigidity allowing for precision on the bike. FIT: With six lengths to choose from and 6 degrees of rise, you know you'll find your perfect fit. - Material: 3D-forged and CNC-machined, 7075 aluminum - Bolts: Titanium - Length: 50mm, 60mm, 70mm, 80mm, 90mm, 100mm - Rise: 6 degree rise - Weight: 100g (at 50mm), 130g (at 100mm) - Clamp Diameter: 35mm - Clamp Height: 40mm - Steerer Tube: 1-1/8"

Making its debut on the all-new Roubaix the S-Works Future stem is the stiff lightweight upgrade that your Roubaix has been waiting for. It's compatible with all Future Shocks and our Specialized accessory mount and its sleek design will create a seamless integration. - Sleek & seamless integration with all Future Shocks. - Supremely stiff for responsive handling and feel. - Compatible with the Specialized accesory mount. - 6-degree rise - Length options: 70-140mm - Approximate weight: 145g (100mm)

Lean and clean. The lightweight and stiff S-Works Tarmac Stem features integrated cable routing for Tarmac SL7 models to clean up the cockpit without complicating the bike build. - Compatible with Tarmac integrated cockpit. - Integrated face-plate computer mount. - 80-140mm length options. - 6 and 12 degree rise options. - Approx. weight: 155g (100mm)

Replacement Boa® Snap 3 dials for S-Works 7 Road shoes. - Includes one cartridge dial assemble and lace. - Left- and right-specific.

Connects the Specialized SL Range Extender Battery with 2nd generation Turbo Levo SL Comp, Comp Carbon, Expert Carbon, and S-Works models. Custom connector with lock mechanism ensures a secure connection. Length: 145mm

SL Range Extender Cable 285mm MTB

Turbo Chainstay-Mounted Kickstand - 323mm.

Charge your Specialized Turbo battery with this high output, custom Li-ion charger. • Custom Specialized Li-ion battery charger • Output: 42V4A • Compact design while delivering huge power • With Rosenberger plug and light indication of the charging status

Enduro trail riding to gravel adventure or backcountry powder mission, the Smith Bobcat sunglasses are for riders and skiers who want the full coverage of the Wildcat with a smaller fit and a lightweight feel. This hybrid design pairs goggle-like coverage with the airflow and easy-wear feel of sunglasses. ChromaPop™ brings out the details on forested trails and in bright alpine bowls. The lens is interchangeable, and a bonus clear lens is included for low-light needs. No-slip fit details keeps them in place through rocky terrain and high-speed descents. Product Details: Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Interchangeable lenses Fit / Integration - Small to medium fit, large coverage - 5-base lens curvature - Slight wraparound fit - Megol temples and nose pads provide non-slip grip so glasses stay put - Two-position adjustable Megol nose pads Frame - Evolve™ bio-based frame material is lightweight and durable - AutoLock hinges hold frames open for easy one-hand on and off - Strategic venting increases airflow for reduced fogging and maximum clarity

When you're moving fast on two wheels, a sharp, unobstructed view is critical. Ripping down singletrack or sprinting to win a stage, the Smith Motive sunglasses offer full coverage and terrain-defining optics. ChromaPop™ lens technology enhances color, contrast and clarity, while the half-frame design offers unrestricted peripheral vision. Because shifting light is a fact of life, they come with interchangeable lenses for different light conditions.

After a long day on the bike, you should be thinking about cracking open a cold one with your buds, not sore spots behind your ears. Ready for the trail, road, or CX course, our Smith Ruckus sunglasses are made for all-day comfort with thin, no-slip temples that are designed to work with your helmet. The raised-brow design with two interchangeable ChromaPop™ lenses gives you great peripheral vision in the riding position and adds enhanced color and detail to your view. When the afternoon sun starts to dip, easily swap lenses using our PivLock™ technology and get ready to enjoy the sunset from the saddle. Product Details Vision - Carbonic lenses offer impact resistance and clear optics - Ignitor lenses for low-light situations - 100% UV protection Fit / Integration - Medium-large fit, large coverage - Megol temple and nose pads provide non-slip grip so glasses stay put - Compatible with our optical docking system (ODS4) prescription lens insert Frame - Lightweight, flexible and durable TR90 frame - AutoLock hinges hold frames open for easy one-hand on and off What's Included - Bonus ChromaPop™ Contrast Rose lens - Performance hard case - Microfiber bag

Geared for speed. The Shift MAG™ gives cyclists and runners every performance advantage possible, from the superlight frame down to the nose piece. The coolest feature is no doubt the interchangeable lens technology. Snap the magnet on the side for quick, fingerprint-free lens changes. These Smith sunglasses come with one clear lens as well a color-enhancing ChromaPop™ lens. Flatter than most performance eyewear, the 5-base frames stay put with a two-position nose piece and no-slip temples. They give you a secure feel when you're going your fastest. Product Details: Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop Fit / Integration - Medium fit, large coverage - 5-base lens curvature for slight wrap fit - Megol temples provide non-slip grip so glasses stay put - Two-click position adjustable fit Megol nose pads Frame - Smith MAG™ lets you change lenses quickly - High impact resistant TR90 nylon frame What's Included - Bonus Clear lens - Performance hard case - Microfiber bag

Long runs, hot laps on the mountain bike or a fast-paced road ride, a clear view of the rocks, roots and terrain ahead is essential. You can count on the Smith Vert PivLock™ sunglasses for a distraction-free feel and a widescreen view that lets you get in the zone whether you’re letting it rip downhill or measuring your effort on a climb. Their cylindrical shield lens and rimless design make for an ultralight, low-profile fit and unobstructed vision. The PivLock™ design lets you easily swap between the ChromaPop™ lens and the bonus clear lens to match the light conditions. Non-slip nose and temple pads keep the Vert right where you need them down high-speed descents and across rough terrain. Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Smudge and moisture resistant coating for easy cleaning and clear optics - Medium to large fit, large coverage Fit / Integration - 6-base cylindrical shield lens curvature - Slight wraparound fit - Megol temple and nose pads provide non-slip grip so glasses stay put - Two-position, adjustable Megol nose pads - AutoLock hinges hold frames open for easy one-hand on and off Frame - High impact resistant TR90 nylon frame - The PivLock™ interchangeable lens system makes lens changes easy

Charge any trail in the Wildcat— Smith’s full coverage, hybrid construction, cylindrical lens sunglass. Constructed from durable Evolve™ frame material and flexible TPU used in Smith goggles, the Wildcat provides coverage and protection like a goggle with the airflow and comfort of a sunglass. Equipped with two-position nose pads and megol temples for no-slip fit, the Wildcat also comes with a bright light ChromaPop™ lens and a secondary clear lens for low-light overcast days or rides with heavy tree canopy. Product Details: Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Smudge and moisture resistant coating for easy cleaning and clear optics - 100% UV protection Fit / Integration - Medium fit, extra-large coverage - 5-base cylindrical lens - Two-position adjustable nose pads - Megol temple and nose pads provide non-slip grip so glasses stay put Frame - Hybrid TR90 and TPU frame - AutoLock hinges hold frames open for easy one-hand on and off

Ladders, log rides and challenging drops, the Smith Wildcat is for riders who go big but don't need to look the part. A versatile, hybrid design, this pair has the protection and coverage of goggles with the airflow and easy-to-wear style of sunglasses. Take on exposed trails or dark, wooded jumps with the included bright-light ChromaPop™ lens, or secondary clear lens. The no-slip fit of the nose and temples will keep the Wildcat in place through every new challenge. Product Details: Vision - ChromaPop™ lenses enhance contrast and natural color to make the details pop - Smudge and moisture-resistant coating for easy cleaning and clear optics - 100% UV protection Fit / Integration - Medium fit, extra-large coverage - 5-base cylindrical lens - Two-position adjustable nose pads - Megol temple and nose pads provide a non-slip grip so glasses stay put Frame - Hybrid TR90 and TPU frame - AutoLock hinges hold frames open for easy one-hand on-and-off What's Included - Bonus clear lens - Performance case - Microfiber bag with internal sleeve

- Permanently seals tube punctures up to 1/8 inch - Non toxic formula installs easily through Schrader valves - Complete with valve core remover and filler tube - Slime keg fills 160 tires at 1/2 the price per ounce of the 16 oz size

Shimano 105 5750 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on compact double cranksets.

- Aluminum pad holder with R55C4 pads

- Drivetrain Speeds: 11 - Double or Triple: Double - Derailleur Capacity: 16 - Front Der/Shifter Compatibility: Shimano Road - Max Ring (teeth): 53 Weight: 98g-112g